$299.00
Get all the tools you need to measure, monitor and understand your audio signal. Reuse these measurements to control other plug-ins or any MIDI controllable hardware!
While the ‘Pro’ plug-ins offer unique possibilities to create your own signal-controlled effects, the ‘Multi’ versions have unique multiple instance features to perform the analysis on several tracks or anywhere in a signal chain.
The metering capabilities of the DPMP plug-in let you control and monitor audio signals exactly the way you want: almost every aspect of the peak, RMS and crest factor meters can be customized. It proposes five different scales by default, including Bob Katz’s popular K-System scales (K-12, K-14, K-20), and you can create your own.
Large coloured statistics displays following your own scales are included for an overview of a track, while histograms give you a precise measurement of the dynamic range of the track. The graphs show the evolution of the audio envelopes over time, and the mid-side switch lets you verify mono compatibility problems and check the “stereoness” of your audio sources very easily. Whether you are working with mono, stereo or surround tracks, this plug-in will fit into your workflow.
All envelopes (peak, RMS, crest factor etc) can be reused for additional monitoring or side chaining purposes: combined together, reversed, modified and recorded as automation curves or sent as MIDI CC messages, they can control other effects in real-time.
FreqAnalyst Multi is the ideal solution for mixing: you can use it as a frequency overlap detector and actually see which part of the spectrum every single instrument uses. It is now also possible to easily compare the spectrum of several instances (for EQ matching or response curve measurement) thanks to the new ‘Diff’ view which displays the difference between several curves.
The frequency analysis can be fine-tuned, and three modes are offered for each channel: instant, peak or average response of several audio tracks can be displayed on the same graph (the plugin supports up to 16 curves). Zooming capabilities and coordinates display let you exactly measure the characteristics of the spectrum for each audio track. Thanks to the advanced routing capabilities you can define different settings for each track and thus adapt the analysis for each audio signal you want to analyze.
With FreqAnalyst Pro, frequency analysis can be fine-tuned: manage precision and rate, apply an offset or slope to the measured spectrum. Two thresholding systems are available, and the time response can be changed thanks to the attack and release parameters. Three modes are offered for each channel: instant, peak or average response can be displayed on the same graph. Zooming capabilities and coordinates display let you exactly measure the characteristics of the spectrum.
A spectrogram view allows you to monitor the evolution of the spectrum over time either in 2D or 3D (3D waterfall mode). All channels are of course available in this view, with exact coordinates display and zooming capabilities.
This plug-in also provides output parameters that you can use to control other effects in real time: the generated automation envelopes or MIDI CC messages include the minimum and maximum frequencies and the energy center of the spectrum, expressed in Hertz or as MIDI note value. With the transformation parameters (offset, amount and reverse), you can customize the generation of these parameters and monitor the modifications on the value graphs. Thanks to this unique functionality, you can now control any effect with the pitch of the audio signal: imagine a filter on an instrument controlled by the pitch of another instrument, compression depending on the pitch of the signal… Anything is possible.
Oscilloscope Multi offers stereo or mid-side channel waveform extraction as well as several synchronization modes. The zooming and precise measurement capabilities let you analyze the waveforms in details, and the XY phase scope view will help you track phase issues within an effect chain or while recording with multiple microphones.
Additionally, a histogram display complements the toolset to check the distribution of the values in the waveform and get an idea of the average peak level.
Four memory slots let you store any waveform in memory: it helps you make comparisons between several setups or portions of your audio project very easily.
StereoScope Multi allows instant, peak or average responses of several audio tracks to be displayed on the same graph (the plug-in supports up to 16 curves). In-depth zooming capabilities and precise coordinates displays allow you to exactly measure the characteristics of the stereo image for each audio track. The advanced routing capabilities of this plugin lets you define different settings for each track, and thus adapt the parameters for each audio signal you want to analyze.
Blue Cat’s StereoScope Pro is a real time stereo field analyzer with multiple views and MIDI/automation output capabilities. It is a powerful help to analyze how the audio signal is spread in the stereo field, and you can easily detect potential phase and mono compatibilities issues.
The stereo analysis can be controlled in detail, and the precise measurement capabilities combined with the zoomable displays let you monitor what is exactly happening. Choose your preferred view for your needs: real-time stereo field display, the evolution of the stereo image over time (2D or 3D), or output parameters that explicitly describe the average position and extent of the audio signal in the stereo field. The 3D waterfall view lets you see in detail from your preferred viewpoint the evolution of the stereo image over time.
The output parameters of this plug-in can be used to control other effects in real-time: the generated automation envelopes or MIDI CC messages include the minimum and maximum positions in the stereo field and the perceived position based on the audio energy spread in the stereo image.
Mac OS
Windows
