SynthMaster ‘Everything Bundle’ includes SynthMaster 2, SynthMaster One and ALL the current preset expansion banks released by KV331 Audio. There are currently 34 preset banks for SynthMaster v2, 13 preset banks for SynthMaster One, with a total of 47 preset banks containing 2800+ presets for various genres.
SynthMaster 2 is a two-layer ‘all-around’ semi-modular software synthesizer and effect plug-in that comes with 2000 factory presets right out of the box. It features many different synthesis methods including VA, Additive, Wavetable, Wavescanning, Phase Modulation, Frequency Modulation, Pulse Width Modulation, Ring Modulation, Amplitude Modulation, Physical Modeling and SFZ Sample Playback synthesis. With its multi-synthesis oscillators, analog modelled/digital filters, flexible effects routing with 11 types of high-quality effects and a massive modulation architecture with 95 separate modulation sources and 650+ modulation targets; SynthMaster is a ‘must-have’ for all synthesizer enthusiasts!
Features
Cross-Platform
SynthMaster 2 runs as a VST and AAX instrument on both Windows and macOS, and also as an Audio Unit instrument on macOS.
2000 Factory Presets
SynthMaster 2 comes with 2000 factory presets from a world-class team of sound designers: Arksun, Aelyx Design, Aiyn Zahev, Bluffmunkey, BigTone, Frank ‘Xenox’ Neumann, Kevin Schroeder, Nori Ubukata, Rob Lee, Vandalism, Vorpal Sound, Gercek Dorman, Michael Kastrup, Umit Uy, Ufuk Kevser, Teoman Pasinlioglu & Brian ‘Xenos’ Lee.
Oscillators
Stereo Oscillators with Unison/Voice Stacking: Oscillators in SynthMaster 2 have stereo output. Using the “voices”, “voices mix”, “detune curve”, “detune spread”, “pan spread”, “tone spread” and “phase spread” parameters, each basic/wavetable oscillator can generate a rich “supersaw” type sound.
Basic Oscillators
Basic oscillators in SynthMaster 2 are capable of synthesizing many different types of waveforms: Sine, Square, Triangle, Sawtooth, Pulse, Noise, single cycle waveforms and multi-sampled WAV/AIFFs defined in SFZ files. Each oscillator comes with 17 different algorithms in the following categories: Spectral (LP, HP, LS, HS, BP, BS), Bend (Bend+, Bend-, Bend+/-), Sync (Rect Window, Half Cos Window, Cos Window, Tri Window, Saw Window), Pulse (Pulse1, Pulse2) and Quantize.
Sine, Square, Triangle, Sawtooth, Pulse, Noise.
Single-cycle waveforms.
Multi sampled WAV/AIFFs defined in SFZ files.
Wavetable Oscillators
A ‘Wavetable’ oscillator is similar to a basic oscillator, except that the waveform can be scanned (interpolated) through up to 256 different waveforms shapes. The position of the waveform can be adjusted using the ‘wave index’ parameter. Starting with version 2.9, SynthMaster now supports loading wavetables from wave files!
Contains many wavetables
You can import your own wavetables by drag and drop
Additive and Vector Oscillators
An ‘Additive’ oscillator is actually 8 ‘basic’ oscillators running together. Each ‘basic’ oscillator has its own detune, tone, phase/pulse width/algorithm parameter, frequency, waveform type and algorithm parameters.
A ‘Vector’ oscillator consists of 4 ‘basic’ oscillators, mixed at different ratios. The mix ratios are determined by 2 orthogonal parameters in 2 dimensions: ‘X Index’ and ‘Y index’.
Semi-Modular Architecture
For each SynthMaster instance, there are 2 layers followed by 2 global effect send busses. The modulators can modulate frequency, phase, amplitude or pulse width of the oscillators or any other modulators at audio rate, or they can be used as regular oscillators. Each layer has its own:
Arpeggiator
2 Oscillators
4 Modulators
2 Filters
4 ADSR Envelopes
2 Multistage Envelopes
2 2D Envelopes
2 LFOs
4 Keyscalers
Massive Modulation Architecture
SynthMaster has more hundreds of modulation targets and 48 modulation sources including ADSR Envelopes, 2D Envelopes, Multistage Envelopes, LFOs, KeyScalers, Easy Parameters, Vocoder Bands, MIDI Velocity, Aftertouch, Pitch Bend and MIDI CC. The modulation matrix, which has 64 available slots, has visual filtering as well so that targets for a specific source or sources for a specific target can be filtered and shown on the user interface.
ADSR Envelopes
2D Envelopes
Multistage Envelopes
LFOs
KeyScalers
Vocoder Bands
MIDI Velocity
Aftertouch
Pitch Bend and MIDI CC
Filters
Zero Delay Feedback Filters: All of the 4 new filter categories in SynthMaster are developed using the zero delay feedback filter technology. With advanced filter parameters like input gain, drive and acid, you can get that “analog” sound from the filters!
VAnalog Filters – The ‘VAnalog’ filters are modelled after the famous ladder filter, so they self oscillate when the filter resonance is maxed out. They have a continuously variable slope, which is unique to SynthMaster. They have 3 different CPU settings: “Basic”, “Normal” and “High”. The Basic setting sounds similar to the other algorithms in most cases and consumes at least 50% less CPU.
Multimode Filters – With the new ‘multimode’ filter type, it is possible to switch from Lowpass to Bandpass to Highpass filter types continuously. For analog multimode filters, it is also possible to change the slope of the filter continuously from 0 dB/oct to 24 dB/oct.
Dual Filters – With the new ‘dual’ filter type, two multimode filters can be run simultaneously, either in parallel or in series. The mix ratios between the filters and the topology (parallel/series) between them can be changed continuously, as well as the modes and cutoff frequencies of the filters.
Comb Filters – Comb filters are digital filters used in physical modeling synthesis.
Effects
Rich set of Effects: SynthMaster features 11 different effect types: Distortion, LoFi, Ensemble, Phaser, 6 Band EQ, Compressor, Vocoder, Delay, Chorus, Tremolo, Reverb.
11 types of effects – Distortion, LoFi, Ensemble, Phaser, 6 Band EQ, Compressor, Vocoder, Delay, Chorus, Tremolo, Reverb.
Flexible Effects Routing – Each of the 11 effect types can be inserted on any layer insert or on any of the 2 global effect bus inserts.
Before/Inside/After Filter Distortion – A distortion stage can be inserted before, after, or even inside the filters. For analog filters, the distortion is applied for each of the 4 filter stages in ‘inside’ mode.
SynthMaster One
SynthMaster One is an easy to use wavetable synthesizer with an intuitive workflow. Although it shares the same engine with its bigger brother SynthMaster 2, it comes with new features like wavetable synthesis. With its simple layout, rich wavetable/waveform content and inspiring factory preset library, designing new sounds with SynthMaster One is a real joy. Watch our videos, listen to the audio demos and you’ll see how easy it is to design sounds with this synth.
Features
Cross-platform VST and AU: SynthMaster One runs as a VST instrument on both Windows and Mac OSX, and also as an Audio Unit instrument on Mac OSX. On Windows, it runs as a standalone application as well
500 Factory Presets: SynthMaster One comes with 500 inspiring factory presets from a world-class team of sound designers: Arksun, Aiyn Zahev, Bulent Biyikoglu, Gercek Dorman, Nori Ubukata, Rob Lee, Ufuk Kevser, Vorpal Sound and Xenos Soundworks
Semi-Modular Architecture: For each SynthMaster One instance, there are 2 oscillators with 2 sub oscillators, 2 Filters, 4 ADSR Envelopes, 2 LFOs, a powerful 16 step arpeggiator/sequencer and also 11 different effects that can be inserted in 6 FX insert slots. The sub oscillators can be connected to the oscillators in 5 different modes which let you use it as a regular sub oscillator or do complex modulations such as ring modulation, amplitude modulation, phase modulation or frequency modulation
16 Step Arpeggiator/Sequencer: The arpeggiator in SynthMaster One features classic arpeggiator modes such as Up, Down, UpDown, DownUp, UpDown2, DownUp2, AsPlayed as well as Sequence, Chord and Arpeggiate modes. Each of the 16 steps of the arpeggiator has its own Velocity, Note Number, Note Length, Slide and Hold parameters
Wavetable Synthesis: SynthMaster One implements true wavetable synthesis which opens up new possibilities for sound design. Unlike SynthMaster where you can sequence up to 16 waveforms to create a wavetable, you can import wave files that contain wavetables into SynthMaster One and use them in your projects. SynthMaster One comes with a rich wavetable library and you can extend that by placing wavetables under the Waveforms folder of SynthMaster One
Stereo Oscillators with up to 16 voices Unison: Each of the 2 oscillators in SynthMaster One have stereo output, and can have up to 16 voices “unison”. Using the “voices”, “voices mix”, “detune curve”, “detune spread”, “pan spread”, “tone spread” and “phase spread” parameters, each oscillator can generate a rich “supersaw” type sound
Zero Delay Feedback Filters: All of the 4 filter categories in SynthMaster One are developed using the zero delay feedback filter technology. With advanced filter parameters like input gain, drive and acid, you can get that “analog” sound from the filters!
Rich Set of Effects: SynthMaster One features 11 different effect types: Distortion, LoFi, Ensemble, Phaser, 6 Band EQ, Compressor, Vocoder, Delay, Chorus, Tremolo, Reverb
Microtuning: SynthMaster One supports Scala tuning, so tuning can be set either for each preset or globally by loading from a Scala tuning file
Preset Browser: SynthMaster One features a comprehensive preset browser with separate search criteria for instrument type, preset attributes, music style or preset author
Importing MIDI patterns as Arpeggiator Sequence: Monophonic or even polyphonic (chord) MIDI patterns can be imported into the arpeggiators in SynthMaster One by just drag and drop of the MIDI file onto the arpeggiator view on the plugin window
